OSA 5030 PPS Distribution Unit
Selection by product category
Primary Reference Source (PRS) -- 6500B PRC -- 5585B PRS -- 3705 PHM GPS Clocks & Timing -- 453x Series -- 5200B OEM Series -- 5230 GPS -- 5240 GPS -- 5581C GPS-SR -- 5230 GLONASS -- 5201 GLONASS SSU / BITS - Synchronisation Supply Units -- 5548C SSU -- 5548C TSG -- 5548B SASE SDU - Synchronisation Distribution Units -- 5533C SDU -- 5135 SDU -- 5530B SDU E1/T1 Retiming Systems -- 5241 Retimer OEM Solutions -- WiMAX series -- OSA 4500 OEM -- OSA 4501 GPS -- 5200B OEM Series -- OSA STAR Clock Time & Frequency Systems -- 3700 PHM -- 4520 GPS-SP -- 4530 GPS-LN -- 5230 GPS-LN -- 5220 NTP Server -- 5225 Time Node -- 5020 LND -- 5030 PPS -- 5051/52 Dual Switch -- 5130 ANF -- F³ Equipment -- 2230 BVA FS PTP - IEEE 1588 -- 5320 PTP Slave -- 5330 PTP Grandmaster Testing & Measurement -- 5565 STS Software & Management -- SyncView PLUS -- SyncView™ -- Local Manager -- RAM -- Sync Architect GLONASS Clocks & Timing Crystal Quartz Oscillators
Services
-- SyncSeminar
-- Factory Services
-- Support Services
-- Field Services
-- Training Courses
-- Network Consultancy
Selection by application
-- ATM Networks -- Base Stations -- Broadcasting -- Calibration Standards -- Computer Synchronisation -- DAB / DVB-T / DTV -- Digital Broadcasting -- DWDM Networks -- E-Business -- GLONASS -- IP-Based Networks -- Location Services / E911 -- Mobile Networks -- Network Synchronisation -- NTP Servers -- Optical Transport Networks -- Power Utilities -- Re-Timing -- Satellite Ground Stations -- SDH & SONET Networks -- Telephone Networks -- Time Distribution -- WiMAX
> OSA 5030 PPS Distribution Unit
A compact, cost efficient, high quality synchronisation distribution solution for OEM and integrators
HIGHLIGHTS
Reliable, low cost, compact
Input frequency 1PPS to 50 MHz
12 PPS outputs low additive phase noise
BNC connectors for all inputs and outputs
AC power supply (100-240 Vac)
Several OSA 5030 can be placed in cascade to extend total output capacity
to the top
GENERAL INFO
OSA 5030 Square Wave Distribution Unit
A compact, cost efficient, high quality PPS distribution solution for OEM and integrators. The OSA 5030 is specifically designed for applications where the square wave is the only acceptable type of signal.
The OSA 5030 PPS Distribution Unit is very easy to install. The unit does not require any type of configuration as the output signals are direct image of input signal. The rack-mount unit is easily installed and smoothly integrates with existing equipment.
Main ApplicationS
Time and frequency distribution unit
Any system requesting square wave distribution
to the top
TECHNICAL SPECIFICATIONS
Power Supply :
AC Power supply: 100 to 240Consumption: 10 W Environmental characteristics:
Operating temperature: 0 to 55°CStorage temperature: -10° to +60°CHumidity: 0 to 95% non condensing
Configuration and monitoring:
Configuration: NoneMonitoring: Alarm contact on Sub-D 9p connector (normally open or closed) EMC, ESD & SAFETY - CE Mark
EMC, ESD: Certified to EN55022: 2005 and EN55024: 2005Safety: Conformance to EN60950: 2001
Input specifications:
Connector: BNC femaleFrequency range: 1PPS to 50 MHzImpedance: 50 ohms or not loaded (Selection by switch)Input level:
Low level : -0.5 to 1.5V
High level : 3.5 to 10V
Input qualification: Loss of signal-Level detection Mechanical:
Mounting: 19" rack mountSize: 43 x 484 x 310 mm (1U x 19’’ x 12’’)Weight: ~3kg (7 lbs) excluding packingConnector access: Rear
Output specifications:
Numbers of outputs: 12Connector: BNC femaleFrequency range: 1PPS to 50 MHz (as input signal)Output level:
Low level : 0 to 0.4V
High level : 4.5 to 5.1V
Output Impedance: 50 ohmsRise time: < 2ns
to the top
Oscilloquartz
SA fax
:
legal notice
-
Information
